Depending on the operating mode, the unit will automatically set the position of the louvers at the optimal angle.
Long reach air flow
With our remakable jet flow technology, its allows at one long reach air flow (18m) and minimum power consumption.Aircraft technology is used to component design the air flow system of the air conditioner.
While the louver is swinging it can be stopped at any angle. On the next start-up the louver returns to the same positron that it was when the operation last stopped.
Up/Down Flap Swing
Flap moves up and down continuously. The Up/Down flap swing can be fixed at the preferred operation angle.
CLEAN OPERATION & FILTER FUNCTION
Self clean mode dries the indoor unit and filter, preventing the growth of mould. This runs for 2 hours after the unit has been switched off.
COMFORT & CONVENIENCE FUNCTION
24-hour On/Off Programmable Timer
By combining a start timer with a stop timer, you can register two timer operations a day. Once set, timers will faithfully start or stop the system at a specified time of the day repeatedly.
The air conditioner automatically selects from among heating, cooling and dry operations.
In ON-TIMER operation, the unit automatically starts the operation a little earlier, so that the room can approach optimum temperature at ON time.
Thanks to this new fin configuration applied to "Heavy Duty Micro", the desired result is itscompact size.
DRY The unit dehumidifies the room by intermittent cooling operation.
High Power Operation
The unit can operate continuously in "HI POWER" mode for 15 minutes. This mode is convenient to reach the desired temperature Auto quickly.
This timer allows the unit to be set to turn ON or OFF automatically once within a 24 hour period.
The room temperature is automatically controlled during the set sleep mode period, ensuring that room temperature will not get too cold or too hot.
ENERGY SAVING FUNCTION
The unit will operate in energy saving mode in order to avoid excessive heating and cooling.
Auto Restart Function
Power blackout auto restart function is a function that records the operational status of the air-conditioner immediately prior to it being switched off by a power cut, and then automatically resumes operations at that point after the power has been restored.
If the remote control fails, the unit can be operated via an on/off switch on the indoor unit.
With wireless “Luminous” remote controls that even “glow in the dark”, it is possible to operate all desired functions of the unit with the click of a button.
In the case that the air conditioner malfunctions, an internal microcomputer automatically runs a self-diagnosis. (Inspection and repair should be performed by authorized dealers.)